BN Business News
Business Maps⌕ Wyszukiwarka Business News
Dodaj firmę do Business Communicatora →
To tłumaczenie jest jeszcze przygotowywane. Poniżej prezentujemy tymczasowo oryginalną wersję angielską.

Biznes · 16.09.19981 min czytania

Airworthiness Directives; Rolls-Royce, plc RB211 Trent 700 Series Turbofan Engines

Automatyczne tłumaczenie lokalne · Oryginalny język źródła

Streszczenie

This amendment adopts a new airworthiness directive (AD) that is applicable to Rolls-Royce, plc RB211 Trent 700 series turbofan engines. This action requires repositioning of the oil metering jet up into the oil distributor within the bevel gearshaft, followed by repetitive inspections of the Magnetic Chip Detector (MCD). Evidence of driving bevel gearshaft ball bearing failure requires replacement of the Step Aside Gearbox (SAGB). This amendment is prompted by reports of uncommanded engine rundowns caused by failure of the SAGB driving bevel gearshaft ball bearing due to oil starvation. This causes a loss of drive to the external gearbox and accessories, resulting in an inflight engine shutdown. The actions specified in this AD are intended to prevent inflight engine shutdowns caused by SAGB driving bevel gearshaft ball bearing failure.

Oryginalny język źródła: Federal Register — Federal Aviation AdministrationOtwórz oryginalny komunikat →

Przeglądaj tematy

Centrum analiz biznesowych →
6

Biznes · 20.05.2026

Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines

The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent7000-72 and Trent7000-72C engines. This proposed AD was prompted by reports of engine in-flight shut-downs (IFSDs) caused by the premature failure of certain parts. This proposed AD would prohibit the installation of certain lubrication/scavenge pumps unless certain installation criteria are met. The FAA is proposing this AD to address the unsafe condition on these products.

Czytaj streszczenie →

Biznes · 14.05.2026

Airworthiness Directives; Dassault Aviation Airplanes

The FAA is superseding Airworthiness Directive (AD) 2023-22- 05, which applied to certain Dassault Aviation Model FAN JET FALCON and FAN JET FALCON SERIES C, D, E, F, and G airplanes. AD 2023-22-05 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-05, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-22-05 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.

Czytaj streszczenie →

Biznes · 14.05.2026

Airworthiness Directives; Airbus SAS Airplanes

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320 series airplanes; and Model A321-211, - 212, -213, -231, -232, -251N, -251NX, -252N, -252NX, -253N, -253NX, - 271N, -271NX, -272N, and -272NX airplanes. This AD was prompted by a review of the cold working process on the assembly line that detected a deviation to the manufacturing process. This AD requires repetitive inspections for the nominal design condition of the fastener holes in the pressure deck membrane to center wing box attachment and, as applicable, an inspection for cracking at the affected area and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

Czytaj streszczenie →

Biznes · 22.05.2026

Airworthiness Directives; Bombardier, Inc., Airplanes

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that inappropriate tooling was used to torque the bolts securing the baggage door stop fittings, which may have resulted in an improper torque condition. This AD requires performing a torque check of affected bolts and re-torquing, re- installing, or replacing affected bolts and nuts as applicable. The FAA is issuing this AD to address the unsafe condition on these products.

Czytaj streszczenie →

Biznes · 22.05.2026

Airworthiness Directives; Airbus SAS Airplanes

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200 series airplanes; Model A330-200 Freighter series airplanes; Model A330-300 series airplanes; and Model A330-841 and -941 airplanes. This AD was prompted by a report of an in-service event and relevant investigation which found that, under specific conditions, a dormant failure of a standby fuel pump could lead to a certain amount of fuel being trapped in the aft section of the inner tank that would be unusable. This AD requires repetitive operational checks of the standby fuel pumps and corrective actions and limits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.

Czytaj streszczenie →

Biznes · 14.05.2026

Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes

The FAA is adopting a new airworthiness directive (AD) for all ATR--GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. This AD was prompted by a report of an occurrence of a flap asymmetry detector and flap interconnection shaft having worn splines and not engaging mechanically. This AD requires a special detailed inspection (SDI) of the affected flap asymmetry detection mechanism, and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

Czytaj streszczenie →