Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes

Özet

The FAA is adopting a new airworthiness directive (AD) for all Fokker Model F.28 Mark 0070 and 0100 airplanes. This AD requires repetitive inspections for damage of the drive rod assembly of the aileron tab on each aileron actuator; repetitive measurements of the clearance between the aileron hydraulic lines and the drive rod; and related investigative and corrective actions if necessary. This AD is prompted by a report of an aileron 2 fault caused by severe wear of the polyamide washer that is part of an anti-rotation bush assembly in the aileron attachment lug. We are issuing this AD to prevent excessive wear of the polyamide washer of the aileron actuator bush assembly, which could result in aileron flutter and loss of control of the airplane.