BN Business News
Business Maps⌕ Pesquisar no Business News
Adicionar empresa →
Esta tradução está a ser preparada. Entretanto, mostramos temporariamente a versão original em inglês.

Negócios · 15/05/20031 min de leitura

Federal Motor Vehicle Safety Standards; Brake Hoses

Tradução automática local · Idioma original da fonte

Resumo

Pursuant to the agency's grant of a joint petition from Elf Atochem North America, Inc., Mark IV Industrial/Dayco Eastman, and Parker Hannifin Corporation, NHTSA proposes to update the Federal motor vehicle safety standard on brake hoses to incorporate the substantive specifications of several Society of Automotive Engineers (SAE) Recommended Practices relating to hydraulic brake hoses, vacuum brake hoses, air brake hoses, and plastic air brake tubing.

Idioma original da fonte: Federal Register — National Highway Traffic Safety AdministrationAbrir o comunicado original →

Explorar análises

Análises empresariais →
6

Negócios · 16/03/2026

Daimler Coaches North America, LLC, Denial of Petition for Decision of Inconsequential Noncompliance

Daimler Coaches North America, LLC (DCNA), a subsidiary of Daimler AG, has determined that certain model year (MY) 2012-2019 Setra S407 and MY 2009-2020 Setra S417 buses do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 101, Controls and Displays. DCNA filed a noncompliance report dated July 15, 2020 and amended its report on July 16, 2020 and March 24, 2021. DCNA petitioned NHTSA (the "Agency") on August 4, 2020 for a decision that the subject noncompliances are inconsequential as they relate to motor vehicle safety. On October 1, 2020 DCNA submitted an amended petition to the Agency. Additionally, DCNA submitted supplemental information to NHTSA on February 5, 2021, March 5, 2021, and March 25, 2021. This notice announces the denial of DCNA's petition.

Ler o resumo →

Negócios · 08/05/2026

Kawasaki Motors Corp., U.S.A., Receipt of Petition for Decision of Inconsequential Noncompliance

Kawasaki Motors Corp., U.S.A. (Kawasaki) has determined that certain model year (MY) 1979-1981 and MY 2017-2025 Kawasaki motorcycles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 122, Motorcycle Brake Systems. Kawasaki filed a noncompliance report dated November 4, 2025, and subsequently petitioned NHTSA (the "Agency") on November 5, 2025, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces receipt of Kawasaki's petition.

Ler o resumo →

Negócios · 04/05/2026

Volkswagen Group of America, Inc., Receipt of Petition for Decision of Inconsequential Noncompliance

Volkswagen Group of America, Inc. (Volkswagen) has determined that certain model year (MY) 2024-2025 Volkswagen Jetta and MY 2024 Volkswagen Taos motor vehicles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 138, Tire Pressure Monitoring System. Volkswagen filed a noncompliance report dated September 17, 2025, and subsequently petitioned NHTSA (the "Agency") on September 30, 2025, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces receipt of Volkswagen's petition.

Ler o resumo →

Negócios · 08/04/2026

Agency Information Collection Activities; Notice and Request for Comment; Consolidated Labeling Requirements for Motor Vehicles (Except the VIN)

The National Highway Traffic Safety Administration (NHTSA) invites public comments about our intention to request the Office of Management and Budget (OMB) approval to reinstate with modification an information collection. Before a Federal agency can collect certain information from the public, it must receive approval from OMB. Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including reinstatement and modification of previously approved collections. This document describes a collection of labeling information on nine Federal Motor Vehicle Safety Standards (FMVSS) for which NHTSA intends to seek OMB approval. The labeling requirements include brake fluid warning for vehicles with a GVWR greater than 3,500 kilograms (7,716 pounds), brake fluid warning for vehicles with a GVWR of 3,500 kilograms (7,716 pounds) or less, glazing labeling, air bag warning labels, seat belt labeling, compressed natural gas (CNG) vehicle fuel label, CNG fuel container labels, hydrogen fueled vehicle fueling label, and hydrogen fuel container labels. NHTSA is also requesti

Ler o resumo →

Negócios · 11/03/2026

Zoox-Receipt of Application for Temporary Exemption From Various Requirements of the Federal Motor Vehicle Safety Standards for an Automated Driving System-Equipped Vehicle; Request for Comment

Zoox, Inc. ("Zoox") has petitioned NHTSA for a temporary exemption from certain requirements in eight Federal Motor Vehicle Safety Standards (FMVSS) applicable to its passenger car equipped with an automated driving system (ADS). Specifically, Zoox seeks exemption from portions of FMVSS No. 103, Windshield defrosting and defogging systems; FMVSS No. 104, Windshield wiping and washing systems; FMVSS No. 108, Lamps, reflective devices, and associated equipment; FMVSS No. 111, Rear visibility; FMVSS No. 135, Light vehicle brake systems; FMVSS No. 201, Occupant protection in interior impact; FMVSS No. 205, Glazing materials; and FMVSS No. 208, Occupant crash protection. NHTSA is publishing this document in accordance with statutory and administrative provisions and seeks comment on the merits of Zoox's exemption application and on potential terms and conditions that should be applied to a temporary exemption if granted. After receiving and considering public comments, NHTSA will make a decision on the merits of the application and will publish a notice in the Federal Register setting forth NHTSA's reasoning for either granting or denying the petition.

Ler o resumo →

Negócios · 01/04/2026

Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 110 To Accommodate ADS-Equipped Vehicles

NHTSA is proposing to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire selection and rims and motor home/ recreation vehicle trailer load carrying capacity information for motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less." The proposed modification would amend a single section of the standard to enable compliance by affixing the required placard on the left side of the vehicle when there is not a "driver's side" for vehicles equipped with Automated Driving Systems (ADS) that do not have manually operated driving controls. This rulemaking would allow flexibility in complying with the standard without detriment to vehicle safety. This action is part of a larger NHTSA effort to address vehicle automation in the agency's regulations.

Ler o resumo →