Airworthiness Directives; Fokker Services B.V. Airplanes

Riepilogo

We propose to adopt a new airworthiness directive (AD) for certain Fokker Services B.V. Model F.28 Mark 0070 and 0100 airplanes. This proposed AD was prompted by a design review that revealed that a wiring failure, external to the center wing fuel tank, could cause a hot short circuit to a maximum level sensor wire, and result in excessive heating of the maximum level sensor element. This proposed AD would require modifying the wiring of the maximum level sensors in the center wing fuel tank, performing after-installation tests, and corrective action if necessary. This proposed AD would also require revising the airplane maintenance or inspection program to incorporate fuel airworthiness limitation items and critical design configuration control limitations. We are proposing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.