Airworthiness Directives; International Aero Engines AG (IAE) V2500-A5 and -D5 Series Turbofan Engines

Riepilogo

This amendment adopts a new airworthiness directive (AD) that is applicable to certain International Aero Engines AG (IAE) V2500-A5 and -D5 series turbofan engines, identified by serial number. This amendment requires the removal of engines assembled with an improper High Pressure Turbine (HPT) module configuration from service prior to accumulating 5,100 or 7,600 cycles in the improper configuration, or at the next shop visit, depending on the type of improper HPT configuration, and restoration to type design. This amendment is prompted by reports of engines that do not conform to the engine type design, which could cause a Low Cycle Fatigue (LCF) life reduction of the HPT stage 1 disk. The actions specified by this AD are intended to restore engines to type design configuration and to prevent possible LCF failure of the HPT stage 1 disk, which could result in an uncontained engine failure and damage to the airplane.