Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 Airplanes

Résumé

We propose to supersede Airworthiness Directive (AD) 87-20-03 R2, which applies to certain Cessna Aircraft Company (Cessna) 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 series airplanes. AD 87-20-03 R2 currently requires repetitive inspections and replacement of parts, if necessary, of the seat rail and seat rail holes; seat pin engagement; seat rollers, washers, and axle bolts or bushings; wall thickness of roller housing and the tang; and lock pin springs. Since we issued AD 87-20-03 R2, we have added steps to the inspection procedures, added revised figures, and clarified some of the existing steps. Consequently, this proposed AD would retain all of the actions from the previous AD and add steps to the inspection procedures in the previous AD. We are proposing this AD to prevent seat slippage or the seat roller housing from departing the seat rail, which may consequently cause the pilot/copilot to be unable to reach all the controls. This failure could lead to the pilot/copilot losing control of the airplane.