Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model A300 C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes); and Model A310-200 and -300 Series Airplanes

Résumé

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A300-600, A310-200, and A310-300 series airplanes. This AD requires inspecting for certain serial numbers on elevators, and doing a detailed inspection, visual inspection with a low-angle light, and tap-test inspection of the upper and lower surfaces of the external skins on certain identified elevators for any damage (i.e., debonding of the graphite fiber reinforced plastic/Tedlar film protection, bulges, debonding of the honeycomb core to the carbon fiber reinforced plastic, abnormal surface reflections, and torn-out plies), and doing corrective actions if necessary. This AD results from reports of debonded skins on the elevators. We are issuing this AD to detect and correct debonding of the skins on the elevators, which could cause reduced structural integrity of an elevator and reduced controllability of the airplane.