Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles, Platform Lift Installations in Motor Vehicles

Resumen

This document responds to petitions for reconsideration of the October 1, 2004 final rule (69 FR 58843), which was in response to the initial petitions for reconsideration of the December 27, 2002 final rule (67 FR 79416) that established two new Federal motor vehicle safety standards (FMVSSs); FMVSS No. 403, Platform lift systems for motor vehicles, and FMVSS No. 404, Platform lift installations in motor vehicles. The purpose of these standards is to prevent injuries and fatalities during lift operation. In the October 2004 final rule the agency clarified the applicability of the standards as well as amended the definitions of certain operational functions, the requirements for lift lighting on public lifts, the interlock requirements, compliance procedures for lifts that manually deploy/stow, the environmental resistance requirements, the edge guard requirements, the wheelchair test device specifications, and the location requirements for public lift controls. The agency received petitions for reconsideration of the October 2004 final rule from a school bus manufacturer, a lift interlock/control manufacturer, a vehicle association, a school bus technical council and a dealer's as