Airworthiness Directives; Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P; and Southwest Florida Aviation SW204, SW204HP, SW205, and SW205A-1 Helicopters Manufactured by Bell Helicopter Textron Inc. for the Armed Forces of the United States

Resumen

This document publishes in the Federal Register an amendment adopting superseding Airworthiness Directive (AD) 2000-22-51, which was sent previously by individual letters to all known U.S. owners and operators of Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH- 1H, UH-1L, and UH-1P; and Southwest Florida Aviation SW204, SW204HP, SW205, and SW205A-1 helicopters manufactured by Bell Helicopter Textron Inc. (BHTI) for the Armed Forces of the United States. This AD requires establishing a retirement life for certain main rotor masts, creating a component history card or equivalent record, and identifying certain masts as unairworthy. This AD also requires removing the hub spring, if installed, and determining whether a main rotor mast (mast) has ever been installed on a helicopter while operated with a hub spring. Conducting certain inspections based on the retirement index number (RIN) and on whether the helicopter was ever operated with a hub spring is also required. Replacing any mast that has inadequate radius or a burr in the damper clamp splined area is also required. Finally, this AD requires sending information concerning the mast to the FAA. This amendment is prompte