Airworthiness Directives; Raytheon Aircraft Company 200, 300, and 1900 Series, and Models F90 and A100-1 Airplanes

Zusammenfassung

This amendment adopts a new airworthiness directive (AD) that applies to certain Raytheon Aircraft Company (Raytheon) 200, 300, and 1900 series, and Models F90 and A100-1 airplanes. This AD requires you to check the airplane logbook to determine if the elevator(s) has/have been removed from the airplane. If the elevator(s) has/have been removed, this AD also requires you to inspect the elevator balance weight attachment screws for correct length, and, if necessary, install new bolts that are of improved design and rebalance the elevator, depending on the results of the inspection. This AD is the result of the elevator balance weight attachment screws and balance weights being improperly installed when balancing the elevator after it had been removed for repair or repainting. The actions specified by this AD are intended to prevent the balance weight attachment screws from becoming loose. Loose screws could come into contact and interfere with the horizontal stabilizer. This interference could restrict elevator movement and result in loss of elevator pitch control.