Airworthiness Directives; Fokker Model F27 Mark 100, 200, 300, 400, 500, 600, and 700 Series Airplanes

الملخص

This document proposes the adoption of a new airworthiness directive (AD) that is applicable to certain Fokker Model F27 Mark 100, 200, 300, 400, 500, 600, and 700 series airplanes. This proposal would require a one-time visual inspection to detect missing rivet heads or loose rivets of the applicable stringer-to-rib connections in the upper and lower wing skin, and repair, if necessary. In lieu of the one-time visual inspection or in addition to that inspection, the proposed AD also would require replacement of certain rivets with certain new rivets in all applicable rib-to-stringer connections of the upper and lower wings. This proposal is prompted by reports of missing rivet heads at the rib-to-stringer connections of the upper and lower wing skin at stringers 5 and 6. The actions specified by the proposed AD are intended to prevent reduced structural integrity of the wings that is caused by problems associated with missing and/or loose rivets.