BN Business News
Business Maps⌕ Search Business News
Add your company to Business Communicator →

Transport i infrastruktura · 01/07/2010

Airworthiness Directives; Ontic Engineering and Manufacturing, Inc. Propeller Governors, Part Numbers C210776, T210761, D210760, and J210761

The FAA is adopting a new airworthiness directive (AD) for certain serial numbers (S/Ns) of Ontic Engineering and Manufacturing, Inc. propeller governors, part numbers (P/Ns) C210776, T210761, D210760, and J210761. This AD requires removal of the affected propeller governors from service. This AD results from three reports received of failed propeller governors. We are issuing this AD to prevent loss of propeller pitch control, damage to the propeller governor, and internal damage to the engine, which could prevent continued safe flight or safe landing.

Source: Federal Register — Transportation DepartmentOpen original release →
6

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 9/15/2026

Modification of Class D and Class E Airspace Areas; Roberts Field/Redmond Municipal Airport, Redmond, OR

This action proposes to modify the Class D and Class E airspace area designated as a surface area, modify the Class E airspace area designated as an extension to a Class D or Class E surface area, and modify the Class E airspace area extending upward from 700 feet above the surface at Roberts Field/Redmond Municipal Airport, Redmond, OR. This action would support the safety and management of instrument flight rules (IFR) operations at the airport.

Read summary →

Transport i infrastruktura · 9/15/2026

Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by a report that a solid-state relay (SSR) used in the left-hand (LH) windshield heating system may allow reverse current flow when in the OFF position. This AD requires modification of the airplane and replacement of the affected SSR with a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.

Read summary →