BN Business News
Business Maps⌕ Search Business News
Add your company to Business Communicator →

Transport i infrastruktura · 1.10.2004

Airworthiness Directives; Airbus Model A320 Series Airplanes

This amendment supersedes an existing airworthiness directive (AD), applicable to certain Airbus Model A320 series airplanes, that currently requires modification of the rear spar web of the wing, cold expansion of certain attachment holes for the forward pintle fitting and certain holes at the actuating cylinder anchorage of the main landing gear (MLG), repetitive inspections for fatigue cracking in certain areas of the rear spar of the wing, and corrective action if necessary. That AD also provides for optional terminating action for the requirements of the AD. This amendment revises certain compliance times for the inspection. The actions specified by this AD are intended to detect and correct fatigue cracking, which may lead to reduced structural integrity of the wing and the MLG. This action is intended to address the identified unsafe condition.

Source: Federal Register — Transportation DepartmentOpen original release →
6

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 9/15/2026

Modification of Class D and Class E Airspace Areas; Roberts Field/Redmond Municipal Airport, Redmond, OR

This action proposes to modify the Class D and Class E airspace area designated as a surface area, modify the Class E airspace area designated as an extension to a Class D or Class E surface area, and modify the Class E airspace area extending upward from 700 feet above the surface at Roberts Field/Redmond Municipal Airport, Redmond, OR. This action would support the safety and management of instrument flight rules (IFR) operations at the airport.

Read summary →

Transport i infrastruktura · 9/15/2026

Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by a report that a solid-state relay (SSR) used in the left-hand (LH) windshield heating system may allow reverse current flow when in the OFF position. This AD requires modification of the airplane and replacement of the affected SSR with a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.

Read summary →