Regulacje i polityka gospodarcza · 30.11.1999

Airworthiness Directives; Precise Flight, Inc. Model SVS III Standby Vacuum Systems

This amendment adopts a new airworthiness directive (AD) that applies to all aircraft equipped with Precise Flight, Inc. Model SVS III standby vacuum systems installed in accordance with the applicable supplemental type certificate (STC) or through field approval. This AD requires incorporating revised operating limitations for the affected standby vacuum systems into the airplane flight manual (AFM), and repetitively inspecting the push-pull cable, vacuum lines, saddle fittings, and shuttle valve for correct installation and damage (wear, chafing, deterioration, etc.). This AD also requires immediately correcting any discrepancy found and conducting a function test of the vacuum system after the inspections. This AD is the result of reports of shuttle valve failure and standby vacuum system malfunction on aircraft. The actions specified by this AD are intended to detect and correct problems with the standby vacuum system before failure or malfunction and to provide operating procedures for the pilot regarding the use and limitations of this system.