Regulacje i polityka gospodarcza · 15.12.1995
Airworthiness Directives; Beech Model 400A Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to certain Beech Model 400A airplanes, that requires an inspection to verify if the securing rivet is installed on the rod end of the control push rods of the spoiler flight control system, an inspection to verify if the jam nut is secure on the opposite end of the rod end, and repair of any discrepancy. This amendment is prompted by a report of loss of roll control on the co-pilot's control wheel shortly after takeoff due to a rivet missing from the control push rod. The actions specified by this AD are intended to ensure that the push rod rivets are installed. Missing control push rod rivets could result in the disengagement of the push rod end from the push rod tube; this could lead to loss of roll control and subsequent reduced controllability of the airplane after takeoff.