BN Business News
Business Maps⌕ Search Business News
Add your company to Business Communicator →

Transport i infrastruktura · 30.08.1994

Airworthiness Directives; Airbus Model A320 Series Airplanes

This document proposes the adoption of a new airworthiness directive (AD) that is applicable to certain Airbus Model A320 series airplanes. This proposal would require repetitive inspections to verify proper installation of the plain bushings of the upper and lower connection links on the forward and aft passenger/crew doors, and correction of discrepancies, if necessary. This proposal would also require replacement of the shouldered bushing on the locking mechanism with a new oversized bushing, which would terminate the repetitive inspection requirements. This proposal is prompted by a report that, during an emergency evacuation of in-service airplanes, the left aft passenger/crew door jammed against the fuselage structure in a nearly closed position due to bushing migration. The actions specified by the proposed AD are intended to prevent jamming of the passenger/crew door, which could delay or impede the evacuation of passengers during an emergency.

Source: Federal Register — Transportation DepartmentOpen original release →
6

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 9/15/2026

Modification of Class D and Class E Airspace Areas; Roberts Field/Redmond Municipal Airport, Redmond, OR

This action proposes to modify the Class D and Class E airspace area designated as a surface area, modify the Class E airspace area designated as an extension to a Class D or Class E surface area, and modify the Class E airspace area extending upward from 700 feet above the surface at Roberts Field/Redmond Municipal Airport, Redmond, OR. This action would support the safety and management of instrument flight rules (IFR) operations at the airport.

Read summary →

Transport i infrastruktura · 9/15/2026

Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by a report that a solid-state relay (SSR) used in the left-hand (LH) windshield heating system may allow reverse current flow when in the OFF position. This AD requires modification of the airplane and replacement of the affected SSR with a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.

Read summary →