BN Business News
Business Maps⌕ Search Business News
Add your company to Business Communicator →

Transport i infrastruktura · 3.01.2011

Federal Motor Vehicle Safety Standard; Engine Control Module Speed Limiter Device

This notice grants two separate but similar petitions for rulemaking, one submitted by the American Trucking Associations and the other submitted by Road Safe America and a group of nine motor carriers (Schneider National, Inc., C.R. England, Inc., H.O. Wolding, Inc., ATS Intermodal, LLC, DART Transit Company, J.B. Hunt Transport, Inc., U.S. Xpress, Inc., Covenant Transport, Inc., and Jet Express, Inc.) to establish a safety standard to require devices that would limit the speed of certain heavy trucks. Based on information received in response to a request for comments,\1\ the National Highway Traffic Safety Administration believes that these petitions merit further consideration through the agency's rulemaking process. In addition, because of the overlapping issues addressed in these two petitions, the agency will address them together in a single rulemaking activity. ---------------------------------------------------------------------------

Source: Federal Register — Transportation DepartmentOpen original release →
6

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 10/1/2026

Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Read summary →

Transport i infrastruktura · 9/15/2026

Modification of Class D and Class E Airspace Areas; Roberts Field/Redmond Municipal Airport, Redmond, OR

This action proposes to modify the Class D and Class E airspace area designated as a surface area, modify the Class E airspace area designated as an extension to a Class D or Class E surface area, and modify the Class E airspace area extending upward from 700 feet above the surface at Roberts Field/Redmond Municipal Airport, Redmond, OR. This action would support the safety and management of instrument flight rules (IFR) operations at the airport.

Read summary →

Transport i infrastruktura · 9/15/2026

Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by a report that a solid-state relay (SSR) used in the left-hand (LH) windshield heating system may allow reverse current flow when in the OFF position. This AD requires modification of the airplane and replacement of the affected SSR with a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.

Read summary →